As we all know, flap wheel is a kind of large sanding wheel with a hard and wear-resistant working surface, strong elasticity, sharp cutting edge, high processing efficiency, no workpiece burning, stable physical and chemical properties, high safety, and simple and convenient continuous operation. These characteristics make it applicable in many industries and become the best popular grinding product for surface treatment. If it is carefully and reasonably maintained in daily use, not only can it extend the service life of flap wheel and give full play to its optimal performance, but it can also avoid minor problems affecting normal production during use.
If there are purification impurities on the flap wheel and the clearance is too small, removing the dirt and checking for damage to the internal parts, and repairing or replacing them in time is all that is needed.
Bearing wear of flap wheel can lead to increased clearance, and the bearings must be replaced in this case.
The flap wheel gear is not firmly fixed, and the impeller cannot be synchronized; thus, the gear should be reassembled, and the contact area of the conical fit should reach 75%.
Gear wear and large clearance are common problems in fans, especially in drum fans with long-term use. Therefore, the gear clearance should be adjusted. If the gear clearance is greater than 30% to 50% of the uniform value, the gear should be replaced.
The flap wheel must be fully packaged during transportation and protected from compression. It should be stored in a ventilated and dry place to avoid exposure and moisture.
Keep the room temperature during grinding process, and do not touch water stains on the ground to prevent slipping.
All flap wheels have certain wear and tear requirements and must be replaced when worn to a certain degree. It is extremely unsafe and illegal to exceed the wear and tear requirements for the sake of material savings.
The use environment of flap wheel should be chosen to operate indoors, with no clutter. During use, attention should be paid, and no mistakes should be made to avoid accidents. If it is used outdoors, a quiet environment should be selected as much as possible.
During the grinding process, the grinding product should be kept parallel to the working horizontal plane, and the user should control the force and avoid being too light or too heavy.
Treasure resources and reduce the impact on the environment is an important concept rooted in our development process. RMN ABRASIVES gradually improves the dust-free grinding environment and innovative high-efficiency and precise grinding products with customers' continued efforts. Currently, our products are exported to more than 50 countries and regions, such as Europe, America, Africa, the Middle East, and Southeast Asia. Our company has become a long-term partner of many internationally renowned companies!